[wplug] ppSCSI

[Doug Green]

Hi-
Does anyone know about parallel port scanners? I already RTFM'd a couple 
times, recompiled, etc... but I can't get the OnSpec 90c26 module (onscsi) to 
load correctly. Here is a brief transcript of a term session:

[root at localhost dgreen]# insmod ppscsi
Using /lib/modules/2.2.17-21mdk/scsi/ppscsi.o
[root at localhost dgreen]# insmod onscsi
Using /lib/modules/2.2.17-21mdk/scsi/onscsi.o
/lib/modules/2.2.17-21mdk/scsi/onscsi.o: init_module: Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including i
nvalid IO or IRQ parameters
[root at localhost dgreen]# cat /proc/modules
ppscsi                 10832   0
tdfx                   52528   2
agpgart                19728   0 [tdfx]
parport_probe           3536   0 (autoclean)
parport_pc              7568   1 (autoclean)
lp                      5552   0 (autoclean)
parport                 7744   1 (autoclean) [parport_probe parport_pc lp]
ppp                    20976   2 (autoclean)
slhc                    4544   0 (autoclean) [ppp]
lockd                  32208   1 (autoclean)
sunrpc                 54640   1 (autoclean) [lockd]
autofs                  9456   2 (autoclean)
mousedev                3728   0 (unused)
usbmouse                1728   0 (unused)
input                   3072   0 [mousedev usbmouse]
usb-uhci               19184   0 (unused)
usbcore                43632   1 [usbmouse usb-uhci]
tulip                  33392   1 (autoclean)
pci-scan                2624   0 (autoclean) [tulip]
es1371                 24656   1
soundcore               2800   4 [es1371]
nls_cp437               3952   2 (autoclean)
vfat                    9408   1 (autoclean)
fat                    30432   1 (autoclean) [vfat]
supermount             14224   3 (autoclean)

I have an Epson printer after the scanner on the parallel chain, but I don't 
believe that it is the source of the problem. Any help would be greatly 
appreciated. Thanks!

Doug

PS- Almost forgot- it's a Microtek Scanmaker X6 parallel port scanner and it 
should work under this driver. There's even an NHF file on it at 
http://www.linuxnewbie.org/nhf/intel/hardware/microtekX6.html  of course, 
this didn't work, or I wouldn't be asking for your help... ;)