[wplug] Request for help.

[Zach Paine]

On Wed, 28 Feb 2001 12:33:38 "Reany, Burt" wrote:
>   The system was configured using the mgetty faq from Mandrake, and the
> Comtrol documentation, but still won't answer incoming calls. I had hoped
> that a listing of "stty -a" from a working incoming line might help me
> identify the deltas with the unresponsive port, to track the problem down
> without an on-site visit.
>   Thanks.

Here is the output of stty -a:
speed 38400 baud; rows 24; columns 80; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 =
M-^?;
start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V;
flush = ^O; min = 1; time = 0;
-parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts
-ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon
-ixoff
-iuclc ixany imaxbel
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0
ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke

Hope that helps.  Did you take a look at the mgetty log files?

-- 
Zach Paine
http://www.wplug.org/~zman/zman.key
Key available from pgp.ai.mit.edu ID: 87746D3D 
Fingerprint: B813 EFB8 ECD0 0C34 6F7F  71DD 01E9 17C3 8774 6D3D