[wplug] Request for help.
Zach Paine
zman at goibsmail.com
Wed Feb 28 13:50:41 EST 2001
> The system was configured using the mgetty faq from
Mandrake, and the
>Comtrol documentation, but still won't answer incoming calls. I
had hoped
>that a listing of "stty -a" from a working incoming line might help
me
>identify the deltas with the unresponsive port, to track the problem
down
>without an on-site visit.
Hrm.. I could do that later on tonight. Do you want that output when
a call comes in or just in it's normal state. Are you sure that mgetty
is setup properly in /etc/inittab on the right port? You should also
edit /etc/mgetty/mgetty.conf (or where ever it is on your system) to
configure each port's settings and most importantly, turn the
debug level up to 9. Test with an incoming call and then take a
look at /var/log/mgetty/mg_ttySX. You will probably find lots of
usefull info in there. Be aware though that after an incoming call
goes through mgetty restarts itself, so you'll have to scroll back
through a couple pages of startup messages to where the error
happens.
Zach
More information about the wplug
mailing list