[wplug] TekRam & Plextor
jmh3 at linuxfreak.com
jmh3 at linuxfreak.com
Sun Dec 24 09:22:59 EST 2000
On Sun, 24 Dec 2000, jjlasalle wrote:
> Santa brought me a TekRam dc390u2w SCSI controller. Red Hat 6.2 found it
> with Kudzu no problem. Also found my Seagate Scorpion DDS2 tape drive. RH
> 6.2 will NOT find my Plextor CDROM drive. The tape drive terminates the
> SCSI chain with ID3. The Plextor sits in the middle with ID 5. The SCSI
> BIOS finds both devices and booting from an MSDOS floppy allows me to read
> the Plextor drive. I tried mounting /dev/sr0 and /dev/sdc0 without success.
> I looked through dmesg but there is not mention of a SCSI CDROM. What to
> try next? I never installed a SCSI tape drive under RH so I was expecting
> trouble there. Go figure. :)
hey.
some silly, but necessary questions:
is the cdrom drive terminated?
is your kernel comfigured to support scsi cdroms? it's under scsi support.
what id is your controller set to?
john
>
> --------------------------------------------------------------------------
> "Do not go where the path may lead,
> go instead where there is no path and leave a trail."
> --RALPH WALDO EMERSON
>
> _______________________________________________
> wplug mailing list
> wplug at wplug.org
> http://www.wplug.org/mailman/listinfo/wplug
>
More information about the wplug
mailing list