Editing 2012 OLF audio

Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
 
This page is to coordinate activities for editing the audio files from the 2012 Ohio LinuxFest.  It is divided into a section for each SD card, which contains a number of talks.  To claim a particular talk or set of talks, download the raw audio file from the linked directory and then change the entry in the "Editor" column from "unclaimed" to your name/e-mail address.  If it takes you more than a few days to work on them, e-mail [[User:Vance|Vance]], otherwise he may revert it back to "unclaimed" so someone else can pick it up.
 
This page is to coordinate activities for editing the audio files from the 2012 Ohio LinuxFest.  It is divided into a section for each SD card, which contains a number of talks.  To claim a particular talk or set of talks, download the raw audio file from the linked directory and then change the entry in the "Editor" column from "unclaimed" to your name/e-mail address.  If it takes you more than a few days to work on them, e-mail [[User:Vance|Vance]], otherwise he may revert it back to "unclaimed" so someone else can pick it up.
  
Contact [[User:Vance|Vance]] for instructions and credentials for uploading the edited files.
+
More specific instructions on editing will appear at the end of this page.  When you're done, name the resulting WAV file as ##.wav with the track number from the table.  Compress the WAV files as FLACs (this saves upload time and storage space) and upload them to INSERT LOCATION.
 
+
More [[#Editing_Instructions|specific instructions on editing]] appear at the end of this page.  When you're done, you should have a FLAC file named as ##.flac with the track number from the table.  Then upload to the location you were given.
+
  
 
== Card 1 ==
 
== Card 1 ==
[http://pair.ohiolinux.org/rawaudio2012/card1/ Link to raw files]
 
  
 
=== Early Penguin Talks ===
 
=== Early Penguin Talks ===
Line 103: Line 100:
  
 
== Card 2 ==
 
== Card 2 ==
[http://pair.ohiolinux.org/rawaudio2012/card2/ Link to raw files]
 
  
 
=== Track 2 Talks ===
 
=== Track 2 Talks ===
Line 154: Line 150:
  
 
== Card 5 ==
 
== Card 5 ==
[http://pair.ohiolinux.org/rawaudio2012/card5/ Link to raw files]
 
  
 
=== Track 4 Talks ===
 
=== Track 4 Talks ===
Line 204: Line 199:
  
 
== Card 6 ==
 
== Card 6 ==
[http://pair.ohiolinux.org/rawaudio2012/card6/ Link to raw files]
 
  
 
=== Opening Keynote Talk ===
 
=== Opening Keynote Talk ===
Line 246: Line 240:
 
|-
 
|-
 
|16
 
|16
|Yes, You Can Run Your Business on PostgreSQL
+
|Using PostgreSQL in Your Business
|Josh Williams
+
|(fill-in speaker)
 
|STE-004.flac
 
|STE-004.flac
 
|unclaimed
 
|unclaimed
Line 257: Line 251:
 
|unclaimed
 
|unclaimed
 
|}
 
|}
 
== Card 7 ==
 
[http://pair.ohiolinux.org/rawaudio2012/card7/ Link to raw files]
 
 
=== Open Source Solutions Stage Talks ===
 
{| border="1"
 
!Track # !! Title !! Speaker !! Raw File(s) !! Editor
 
|-
 
|51
 
|Advancements in Open Source Virtualization with KVM
 
|Mike Day
 
|STE-001.flac
 
|unclaimed
 
|-
 
|52
 
|Bringing Linux Essentials to the Classroom
 
|Medina Dupuis
 
|STE-001.flac
 
|unclaimed
 
|-
 
|53
 
|Open Source Initiatives at HP
 
|Phil Robb
 
|STE-002.flac
 
|unclaimed
 
|-
 
|54
 
|Help a Sysadmin Out!
 
|Alex Juarez
 
|STE-002.flac
 
|unclaimed
 
|-
 
|55
 
|Cloud Monitoring in 15 Minutes or Less
 
|Rob Booth
 
|colspan="2"|N/A; didn't use microphone
 
|-
 
|56
 
|Arista Networks Extensible Operating System
 
|Darrin Machay
 
|colspan="2"|N/A; didn't use microphone
 
|}
 
 
 
== Card 9 ==
 
[http://pair.ohiolinux.org/rawaudio2012/card9/ Link to raw files]
 
 
=== Career Track Talks ===
 
{| border="1"
 
!Track # !! Title !! Speaker !! Raw File(s) !! Editor
 
|-
 
|61
 
|The American Dream: Seven Steps to (Career) Ownership
 
|Janine Moon
 
|SR000F.flac / SR000R.flac
 
|unclaimed
 
|-
 
|62
 
|CoverMyMeds
 
|Matt Scantland
 
|SR000F.flac / SR000R.flac
 
|unclaimed
 
|-
 
|63
 
|2CheckOut
 
|Alan Czako
 
|SR000F.flac / SR000R.flac
 
|unclaimed
 
|-
 
|64
 
|The Perspective of Recruiters
 
|Lou Russo and Rufus Smith
 
|SR001F.flac / SR001R.flac
 
|unclaimed
 
|-
 
|65
 
|LPI: Catching the Wave of Open Source Careers
 
|Ross Brunson
 
|SR001F.flac / SR001R.flac
 
|unclaimed
 
|-
 
|66
 
|The Intentional Career
 
|David Crone
 
|SR001F.flac / SR001R.flac
 
|unclaimed
 
|-
 
|67
 
|Manta
 
|Steven ?
 
|SR002F.flac / SR002R.flac
 
|unclaimed
 
|-
 
|68
 
|Rackspace
 
|Tricia Medina, Deborah Carter, Christine ?, ? Brown
 
|SR002F.flac / SR002R.flac
 
|unclaimed
 
|-
 
|69
 
|You Inc. - Taking Control of Your Career
 
|Ben Blanquera
 
|SR002F.flac / SR002R.flac
 
|unclaimed
 
|}
 
 
 
== Editing Instructions ==
 
 
Some general notes:
 
* Audacity works fine, and is what I'll describe.  If you like something else better, use that.
 
* Take care not to change the sample rate from the original.  Some files are 44.1 kHz, some are 48 kHz.  Using '''File -> Import''' in Audacity will cause resampling to the project's rate.  Use '''File -> Open''' instead to avoid this.
 
* The final product will be a separate 1-channel (mono) 16-bit PCM WAV file for each talk.  Compress this into a FLAC file before uploading to save time and space.
 
 
There are two methods that were used for recording the talks.  The Early Penguin and Career Track talks were recorded using the [http://www.zoom.co.jp/english/products/h2/ H2's] four built-in microphones.  This results in two stereo files with the names SR###F.wav and SR###R.wav.  The "F" comes from the front microphones and the "R" from the rear ones.  The rest of the talks were taken directly from the PA soundboard via the line-in jack.  These have only a single stereo file named STE-###.wav.  All of these were compressed into .flac files before uploading.
 
 
=== Separating talks ===
 
 
Load the STE-###.flac or SR###F.flac file into Audacity with '''File -> Open'''.  If applicable, also import the matching SR###R.flac file using '''File -> Import'''.  Locate the beginning of the talk in question.  There may be some random discussion, so find the place where the speaker "officially" starts their presentation.  Highlight and delete everything prior to this point ('''Edit -> Delete''').  If you have more than one track on screen, make sure you hit all of them.
 
 
Next you locate the end of the talk.  This is after the speaker has finished and any open question-and-answer period.  Some recordings may capture post-talk conversations that individuals are having with the speaker.  These should '''not''' be included as they are not intended to be public.  Highlight everything from this point to the end of all tracks, and then delete.
 
 
=== Selecting audio channel ===
 
 
From the drop-down track menu (the downward-pointing triangle at the upper left of the track), select '''Split Stereo to Mono''' for each track.  Now your job is to choose which of these sounds the best.  You can isolate tracks using the '''Mute''' and '''Solo''' buttons on each track.
 
 
If you're working on a STE-###.flac file, there should really be no difference.  If you find that one has more noise or lower signal, then delete that track by clicking the X in the upper left; otherwise, pick one at random to delete.
 
 
For the SR###F.flac / SR###R.flac files, you'll probably find that one of the channels is louder than the others.  Pick whichever one seems to have the best signal to noise ratio, then delete the rest using the X in the upper left.
 
 
=== Normalizing ===
 
 
At this point you'll have just one single mono track left.  Make sure you do not have a selection made, or alternatively select the entire track.  Now you'll want to change the display to '''Waveform (dB)''' using the drop-down track menu (the triangle in the upper left of the track).  You can zoom in by left-clicking on the scale or zoom out by right-clicking.
 
 
[[Image:Olfcompressor1.jpg]]
 
 
You should see something like the above (minus the red and green lines).  The red line represents the noise floor: that is, the amount of sound present when no one is talking.  For STE-###.flac files, you can probably just set this to -60 dB and not worry about it, since noise shouldn't be a problem there.  For the SR###F/R.flac files, you'll have to listen and pick a reasonable value (take note that this can only be adjusted in 5 dB steps).  Here we've chosen -55 dB.
 
 
The green line indicates the threshold value.  This is the point at which the effect starts to tamp down the louder peaks so that the entire track has a more consistent volume level.  Set this around the level of the most quiet parts of the speech.  Here we're using -50 dB.  Try not to set this too close to the noise floor; a 5 dB difference is probably as close as you want to be.
 
 
Now we select '''Effect -> Compressor''' from the menu and get a dialog like the below.
 
 
[[Image:Olfcompressor2.jpg]]
 
 
As discussed, we have set the threshold at -50 dB and the noise floor at -55 dB.  Those two settings are the only ones that need to be changed from one speech to another.  Make the ratio 10:1, attack time 0.1 secs, and decay time 1.0 secs.  Check the box for '''Make-up gain''', and uncheck the one for '''Compress based on Peaks'''.  Then click '''OK''' and wait a few minutes for it to work its magic.
 
 
[[Image:Olfcompressor3.jpg]]
 
 
When complete, you should get something like the above.  The times where the speaker is talking should be no lower than -15 dB, and preferably -12 dB or greater.  This example is quite noisy, so you don't see as much differentiation between periods of speech and periods of silence.  Take a listen and if you're not happy, hit '''Edit -> Undo''' and try again with different settings.
 
 
=== Saving ===
 
 
Once you're happy with the way things sound, go to '''File -> Export'''.  You can select "WAV signed 16 bit PCM" as the format, or if it's supported choose "FLAC" from within Audacity (make sure under "Options" you choose 16 bit).  Name the file with the track number (e.g., 07.wav or 07.flac).  WAV files can be compressed after the fact using the command line '''flac --best ##.wav''' which will create a file named ##.flac.
 

Please note that all contributions to WPLUG may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see WPLUG:Copyrights for details). Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)