[wplug] PFSense, load-balance router setup on old hardware.

[Zachary Uram]

What is a cablecard?

On Wed, Apr 1, 2015 at 3:13 PM, Drew from Zhrodague <
drewzhrodague at zhrodague.net> wrote:

> On 4/1/15 11:13 AM, Eric Cooper wrote:
>
>> On Tue, Mar 31, 2015 at 07:03:17PM -0400, Drew from Zhrodague wrote:
>>
>>> FiOS note: You do NOT need to use their router, you just call them to
>>> light
>>> the ethernet port instead.
>>>
>>
>> I do this too, but it means no FiOS TV, right?
>>
>>          TV still comes out of the coax, if you have it. There's an
> ethernet port on the ONT wall-box. You can ask them to turn this port on
> instead of using the separate cable-modem/wifi/router they give you. The
> installers are clueless, but if you ask them over the phone, they'll switch
> it over.
>
>         Likewise, if you want a cablecard, you have to call them over the
> phone. I had to get them to do full reset of my cablecard before it would
> work - they were actually nice over the phone!
>
> --
>
> Drew from Zhrodague
> post-apocalyptic ad-hoc industrialist
> drew at zhrodague.net
> _______________________________________________
> wplug mailing list
> wplug at wplug.org
> http://www.wplug.org/mailman/listinfo/wplug
>



-- 
http://www.fidei.org