[wplug] router
Zachary Uram
netrek at gmail.com
Wed Jan 22 12:45:55 EST 2014
Ok I managed to login and I changed my wireless settings to use WPA2
encryption. When I click on wireless settings now it displays my WPA2 ASCII
key I created. Only I can see that key right? I'm just a bit worried seeing
it displayed there.
On Wed, Jan 22, 2014 at 12:33 PM, Eric Wood <esw148 at cawunited.com> wrote:
> If it's the Actiontec MI24WR router:
>
> The default user name for the Actiontec MI424WR router is "admin," and the
> default password is "password" (do not include the quotation marks).
>
>
> - *Note*: To improve security, your *router password may have been
> changed to the serial number of your Actiontec MI424WR router if you
> hadn't
> previously changed the password from the default of "password." You can
> find your router's serial number on the label affixed to the bottom or
> back
> of your router.*
> - If you reset your router to the factory default settings, the router
> password will return to "password."
>
> The user name and password are both case-sensitive, so be sure to enter
> them in lower case.
>
> When mine was setup, the password was set to the serial number (in
> uppercase) that's on the sticker on the router underneath the barcode.
>
>
> On Wed, Jan 22, 2014 at 12:27 PM, WEBER, Lawrence <
> lawrence.weber at ansaldo-sts.us> wrote:
>
> > There was originally a sticker on your router with the name and password.
> > If that is gone you might be hosed. Check out the Verizon website for
> how
> > to install and configure your router. It is pretty good and easy to
> follow.
> >
> >
> > _______________________________________________
> > wplug mailing list
> > wplug at wplug.org
> > http://www.wplug.org/mailman/listinfo/wplug
> >
> _______________________________________________
> wplug mailing list
> wplug at wplug.org
> http://www.wplug.org/mailman/listinfo/wplug
>
--
http://www.fidei.org
More information about the wplug
mailing list