[wplug] Apache2 config

[tom.grove at nepinc.com]

Sounds like a firewall issue to me. I would run system-config- 
securitylevel and see if your firewall is enabled. If it is you will  
need to customize it and open up http (port 80).

Tom Grove

On Feb 27, 2009, at 10:18 PM, "Weber, Lawrence A" <Lawrence.Weber at ansaldo-sts.us 
 > wrote:

> I have been arguing with an Apache2 server (versions 2.2.9 and  
> 2.2.11) for the last couple of days.
>
> I can access the server from the PC (fedora 9) that it is installed  
> on.  Web pages, cgi all work fine.  However I have no access to the  
> server from any other network connected host.  The browsers are set  
> to not use the proxy server for my server's IP address.  I have no  
> problems using boa (which is not running now).
>
> The error_log only shows my starts and stops of the server.  The  
> access_log only shows the access from the local IP address.
>
> I realize that this isn't much info but any ideas where I should be  
> looking to fix this?
>
> I have looked through httpd.conf and everything looks right to me  
> there.
>
> _______________________________________________
> wplug mailing list
> wplug at wplug.org
> http://www.wplug.org/mailman/listinfo/wplug
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.wplug.org/pipermail/wplug/attachments/20090227/461f36a7/attachment.html