[wplug] Miss identified Gamepad

[Gentgeen]

I have a Interact ProPad 6 (simple 6 button, 1 d-pad) gamepad.   

   seen here
http://www.dealtime.com/xPF-Interact_Accessories_InterAct_ProPad_6_P_228A


It use to work fine with my Debian box (currently running Etch, with
kernel 2.6.16-2-k7), but for other reasons, I had
removed it some time back.  I recently wanted to but it back on, so I
went through and repeated the steps I had in the paste. 

modprobe analog map=gamepad
modprobe fm801-gp
modprobe ns558

Things looked fine, but when I ran jstest /dev/input/js0 -- it did not
show up correctly.

after a bit more work, I find that during bootup, the gamepad, and the
gameport are being detected, but the gamepad is coming up as "Analog
4-axis 4-button joystick"


I have commented out the gameport, ns558, jodev, analog from my
/etc/modules file. but they are apparently still being loaded.  I assume
buy hotplug, but adding those same modules to /etc/hotplug/blacklist did
not stop them from being loaded. The gamepad still gets detected as a 4
axis 4 button joystick.

I would like to hunt down WHERE this is happening, so I can tell it
exactly what the gamepad is, instead of the auto detect.  Or I would
like to tell it not to auto detect, and I can load it when I need it.
But I don't know where to look.  

I have pasted a few things below that I think might help, but if it is
not enough, just let me know.  If anyone could give me some insight I
would trully apprciate it.


A SECTION OF OUTPUT FROM DMESG
-------------------------------------------------
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 5 (level, low)
-> IRQ 5
PCI parallel port detected: 131f:2020, I/O at 0xd400(0xd000)
parport1: PC-style at 0xd400 (0xd000) [PCSPP,TRISTATE]
input: PC Speaker as /class/input/input2
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1
alt 0 proto 2 vid 0x03F0 pid 0x3D11
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
ide-floppy driver 0.99.newide
hdb: No disk in drive
hdb: 98304kB, 32/64/96 CHS, 4096 kBps, 512 sector size, 2941 rpm
Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
Model 1006 Rev 00000000 Serial 10061102
sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not
inserted.
gameport: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x201, speed
648kHz
input: Analog 4-axis 4-button joystick as /class/input/input3
Linux agpgart interface v0.101 (c) Dave Jones
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mice: PS/2 mouse device common for all mice



-- 
http://gentgeen.homelinux.org

#############################################################
 Associate yourself with men of good quality if you esteem    
 your own reputation; for 'tis better to be alone then in bad 
 company.        - George Washington, Rules of Civility