[wplug] fios & IPCOP

Mike techmike at gmail.com
Wed Jul 26 08:10:28 EDT 2006


Another common thing a lot of DSL providers are doing lately is
incorporating a NAT firewall into the modem.  Verizon included (Cannot speak
for FIOS however).  Any PC you hang off that modem is going to get a private
NATted address.

Plug your PC right into the ONT where the fiber terminates, does your
machine pull a private or public address?  If it's public, IPCOP should be
fine.  If it's a private, contact Verizon and see if they can set the ONT up
in bridge mode.

If it's the MAC address, you should be able to change it in IPCOP..
Where xx:xx:xx:xx:xx is the MAC address your cloning.  Where eth1 is your
red interface.

ifconfig eth1 down hw ether xx:xx:xx:xx:xx
then
ifconfig eth1 up

-Mike

On 7/26/06, Jason Carr <jason at flacid.org> wrote:
>
> More than likely, you can only use one MAC address per connection, so
> you may need to let the MAC address "expire" (I'm guessing a DHCP
> lease).  If you connect the new device with a new MAC overnight, it
> might just work in the morning.
>
> Another option is to call Verizon and just say "I hooked another device
> up to my connection and it won't get a DCHP lease."  They should know
> what to do to fix the problem.
>
> - Jason
>
> Nathan Marcus wrote:
> > I have never used IPCOP before, but it does look quite good and will
> > check it out.
> >
> > I think I may know what an issue may be though.  I was setting up
> > putting a VoIP box in front of the router they supplied me and had
> > trouble getting it to "connect" so to speak.  So I noticed the VoIP
> > ATA came with Mac cloning and I figured, eh, might as well clone the
> > router MAC and see what happens... and that connected it.  So MAC
> > cloning of the router you get might be what you need?
> >
> > On 7/25/06, Brian A. Seklecki <lavalamp at spiritual-machines.org> wrote:
> >> On Sun, 23 Jul 2006, Phil Groschwitz wrote:
> >>
> >> > All,
> >> >
> >> > Has anyone had any experience with Verizon FIOS and IPCOP?  Trying to
> >> > find out if it works seamlessly like Cable internet access or
> >> > problematic like with DSL.
> >>
> >> Are you asking:
> >>
> >> *) Is it DHCP, PPPoE, 802.1x, or is it Static IP to the CPE?
> >> *) Is it asynchronous or asymmetric bandwidth (despite being fiber)
> just
> >>     to upset customers and prevent them from sharing digital media?
> >> *) Is the ISP's backbone a complete wreck of underpowered, insecure
> >>     poorly managed routers like Bay BNCs and Lucent PortMaster 1s,
> >>     connected to the worst set of BGP peers imaginable (describing
> >> Comcast
> >>     and Verzion here, BTW)
> >>
> >>
> >> Be not confused here.  You're doing business with the same encarnation
> of
> >> Satan that brough you CENTREX ISDN; -- and when you dance with the
> devil,
> >> you wait for the music to stop...you know?
> >>
> >> The only difference now is that because the delivery media is Fiber
> >> instead of Copper, they're under no federal govt. mandate to open the
> >> network to competition.
> >>
> >> ~BAS
> >> _______________________________________________
> >> wplug mailing list
> >> wplug at wplug.org
> >> http://www.wplug.org/mailman/listinfo/wplug
> >>
> > _______________________________________________
> > wplug mailing list
> > wplug at wplug.org
> > http://www.wplug.org/mailman/listinfo/wplug
> _______________________________________________
> wplug mailing list
> wplug at wplug.org
> http://www.wplug.org/mailman/listinfo/wplug
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.wplug.org/pipermail/wplug/attachments/20060726/7f0a2aa8/attachment.html


More information about the wplug mailing list