[wplug] Network problems

[Chris Romano]

On 8/30/05, Poyner, Brandon <bpoyner at ccac.edu> wrote:

> > I just got in 2 new HP DL-140 servers. I installed Slackware 10.1
> > on the first one and am having connectivity problems. I can not
> > ping any machine on or off of the network. The server has dual
> > 10/100/1000 nics Intel I believe (Tigon3 via dmesg). I have tried
> > both nics and different ports on the switch. No luck. Am I
> > missing something here? Here are some outputs.
> 
> What are the outputs of 'ethtool eth1' (or mii-tool) and 'arp -an' ?

 # ethtool eth1
 Supported ports: [ MII ]
Supported Link modes : 10baseT/Half 10baseT/Full
 100baseT/Half 100baseT/Full
 1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes Advertised Link modes : 10baseT/Half 
10baseT/Full
 100baseT/Half 100baseT/Full
 1000baseT/Half 1000baseT/Full
Advertised auto-negotiation: Yes
Speed: Unknown! (65535)
Duplex: Unknown! (255)
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports wake-on: g
Wake-on: d
Current message level: 0x000000ff (255)
Link detected: no
 # arp -an
#
 Bare in mind, that I am hand typing this in. Without a net connection, 
burner, or floppy, I don't know how to bring the data over.
 Thanks,
Chris
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.wplug.org/pipermail/wplug/attachments/20050830/eb7a2cd1/attachment.html