[wplug] DMA
Eric C. Cooper
ecc at cmu.edu
Tue Mar 11 20:03:07 EST 2003
On Tue, Mar 11, 2003 at 06:25:11PM -0500, Henry Umansky wrote:
> <snip>
> hdd: command error: status=0x51 { DriveReady SeekComplete Error }
> hdd: command error: error=0x50
> end_request: I/O error, dev 16:40 (hdd), sector 1448
> hdd: command error: status=0x51 { DriveReady SeekComplete Error }
> hdd: command error: error=0x50
> end_request: I/O error, dev 16:40 (hdd), sector 1452
> hdd: command error: status=0x51 { DriveReady SeekComplete Error }
> hdd: command error: error=0x50
> end_request: I/O error, dev 16:40 (hdd), sector 1220
> </snip>
>
> This goes on for a while, a lot longer than my terminal buffer can
> handle, so I assume it does that through every sector on my DVD drive.
You might also double-check the jumper setting on the drive. I had a
CD drive behave similarly and it turned out that the jumper was not
actually making contact (I was surprised that it still "mostly worked").
--
Eric C. Cooper e c c @ c m u . e d u
More information about the wplug
mailing list