[wplug] Netgear driver
Andy Grundman
tiny at kahncentral.net
Mon Sep 10 10:18:55 EDT 2001
Donald Becker's network card driver page at http://www.scyld.com/network/ethercard.html says the driver to use is natsemi.c. You
should be able to find this in your kernel configuration under Network device support -> Ethernet 10 or 100Mbit -> National
Semiconductor DP8381x series (that's from a 2.4.2 menu).
If you're using a standard distro kernel, try typing "modprobe natsemi", then type "dmesg" to see if it detected your card.
-Andy
----- Original Message -----
From: "James B. Diskin" <james.b.diskin at verizon.net>
To: <wplug at wplug.org>
Sent: Monday, September 10, 2001 9:55 AM
Subject: [wplug] Netgear driver
> I can not get my FA311 Fast Ethernet PCI Card driver to work with Linux.
>
> BA DSL will get nasty if I change Ethernet Cards.
>
> Can anybody help me?
>
> Thanks
>
> Jim
>
> _______________________________________________
> wplug mailing list
> wplug at wplug.org
> http://www.wplug.org/mailman/listinfo/wplug
>
More information about the wplug
mailing list