[wplug] Dual booting with NT 4.0 WS

Edward Walter ewalter at tpresence.com
Tue May 22 10:46:11 EDT 2001


Assuming that you installed lilo on Linux's boot partition, I'll assume
/dev/hda2 here, you need to do the following:

1) Boot into linux using the boot floppy you created at install time... You
did create a boot floppy, right ;^)
2) dd if=/dev/hda2 of=/bootsect.lnx bs=512 count=1
3) copy bootsect.lnx to a floppy
4) boot into NT
5) copy bootsect.lnx to c:\
6) edit c:\boot.ini and add the following line
c:\bootsect.lnx="linux"
7) make sure to set boot.ini back to read only... sometimes NT gets upset if
you don't
8) reboot and verify that you can get into linux without the floppy


-----Original Message-----
From: PJ Stein [mailto:diveman59 at whale-mail.com]
Sent: Monday, May 21, 2001 11:28 PM
To: wplug at wplug.org
Subject: [wplug] Dual booting with NT 4.0 WS


Hello All,
I have been trying to use the HOWTO on dual booting between NT 4.0 and
Linux, but I can not seem to get the bootsector peeled from my root
partition. I would like to do it this way rather than using the BOOTPART
program. (I like doing things the hard way first). Any help or
suggestions would be great !
Paul

_______________________________________________
wplug mailing list
wplug at wplug.org
http://www.wplug.org/mailman/listinfo/wplug



More information about the wplug mailing list