[wplug] Request for help.

[Reany, Burt]

Thanks!! I won't be looking at it until this weekend - it's 380 miles each
way - and I can't dial in to do it because there's no way to log onto the
system until this works.
   I appreciate the help a lot -
  Burt R.


> -----Original Message-----
> From:	Zach Paine [SMTP:zman at wplug.org]
> Sent:	Wednesday, February 28, 2001 7:39 PM
> To:	wplug at wplug.org
> Subject:	RE: [wplug] Request for help.
> 
> 
> On Wed, 28 Feb 2001 12:33:38 "Reany, Burt" wrote:
> >   The system was configured using the mgetty faq from Mandrake, and the
> > Comtrol documentation, but still won't answer incoming calls. I had
> hoped
> > that a listing of "stty -a" from a working incoming line might help me
> > identify the deltas with the unresponsive port, to track the problem
> down
> > without an on-site visit.
> >   Thanks.
> 
> Here is the output of stty -a:
> speed 38400 baud; rows 24; columns 80; line = 0;
> intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 =
> M-^?;
> start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V;
> flush = ^O; min = 1; time = 0;
> -parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts
> -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon
> -ixoff
> -iuclc ixany imaxbel
> opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0
> vt0
> ff0
> isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop
> -echoprt
> echoctl echoke
> 
> Hope that helps.  Did you take a look at the mgetty log files?
> 
> -- 
> Zach Paine
> http://www.wplug.org/~zman/zman.key
> Key available from pgp.ai.mit.edu ID: 87746D3D 
> Fingerprint: B813 EFB8 ECD0 0C34 6F7F  71DD 01E9 17C3 8774 6D3D
> 
> _______________________________________________
> wplug mailing list
> wplug at wplug.org
> http://www.wplug.org/mailman/listinfo/wplug