[wplug] mini-computers available cheap ($15?)
David Tessitor
dttessitor at home.com
Fri Dec 15 13:18:40 EST 2000
As of today, the vendor has not gotten in the shipment, but he expects
to be getting in 150-300 units. I was told that this will probably be
the last batch he will have available and he has raised the price to $19
each, however, he said that in bulk he can make the price $16 each. As
long as I tell him the tally, he will reserve that number and not sell
them. He'll take the ones we have reserved to Monroeville for the
January 6-7 MarketPro show, when/where WPLUG and PACC should also have a
table.
They sell through internet auctions/sales and do other shows, so it
would be good to post any orders early to the list or to me so I can let
him know how many to reserve. So far I have reserved 25 to cover those
who have already said they want one/some.
Dave
David Tessitor wrote:
> Specs:
>
> Unisys, Intel 486-66DX2; 12 MB RAM; one floppy; one 340 MB
> harddrive; and one expansion slot; on the motherboard: internal
> nic & video w/1(?)meg RAM, one parallel port, two serial ports, ps2
> keyboard and mouse ports. The back of the case has a special outlet
> for the monitor or other peripheral (turns on with the computer),
> and the power supply fan is a generic pentium processor cooling fan
> (small and quiet).
>
> Additional RAM is available at less than $1/MB. The controller can
> take two drives, but there is only room for one in the case (a cable
> could be fished out the expansion slot). It reportedly can take
> large (multi-Gig) hard drives (but I think it probably relies on the
> operating system to access them rather than the bios).
>
> ------
>
> Brian Sammon has been using one of these work horses as a firewall
> for a while (you may have seen it at a GUM or Installfest), and he's
> getting a couple more. I bought 4 at the last show and will be
> ordering double that for my purposes (loaners to volunteers, etc.).
> Several people have already asked for a one or two each. At this
> point I think the total is around 15 or so. That should be enough
> to get them for the earlier price or less, even if the single unit
> price goes up.
>
> If you want to order any (heck, at this price and size you can
> afford to also get one or more to keep as spares) LET ME KNOW. I
> plan to call the dealer later in the week.
>
> Dave
> 412-343-6177
> 412-343-2332
>
> _______________________________________________
> wplug mailing list
> wplug at wplug.org
> http://www.wplug.org/mailman/listinfo/wplug
More information about the wplug
mailing list